- Online only
- New

Original Mercedes dealer diagnostic tool, which is used with Xentry Diagnosis system
For sale brand new original Mercedes Xentry Diagnosis VCI (made by BOSCH)
• Comes with OBD2 cable, USB cable
• software is not included
• Supports newest Mercedes diagnostics W206, W254, W223
• Perfect for Mercedes COMAND NTG5, NTG5s1, NTG5s2, NTG5.5, NTG6, NTG7 flashing/programming
• Works with these diagnostic software: Vediamo, Monaco DTS, Xentry Openshell, XENTRY Flash (XENTRY Diagnosis, XENTRY DAS), SCN coding
• Comes with 12 months warranty
Any questions - please contact us
Property |
Value/range |
Host interface |
|
Wired |
High speed USB 2.0 |
Wireless WiFi USB flash drive |
802.11b/g/n |
Processor system |
|
Microprocessor |
Intel MX6 Solo |
Clock rate |
800 MHz |
RAM |
512 MB DDR3 RAM |
RON |
512 MB Flash |
Mass storage (opt.) |
USB memory stick |
User interface |
|
LEDs |
5 status LEDs |
Signal tone beeper |
Acoustic signal tone |
Power supply |
|
From the vehicle battery via the diagnosis connection cable or via a connected USB connection cable. Important: Diagnostic socket of the vehicle must be secured with a fuse of maximum 6 A/32 V. |
OBD: 8 to 28 VDC; 750 mA USB: 5 VDC; 700 mA |
Mechanical properties |
|
Dimensions |
168 x 115 x 45 mm |
Weight |
0.41 kg |
Operating temperature |
-20 °C – +60 °C |
Storage temperature |
-40 °C – +80 °C |
Humidity at 25 °C |
30% – 95% |
Maximum operating height |
4,000 m |
Protection class when diagnosis connection cable not plugged in |
IP 30 |
Protection class when diagnosis connection cable screw-fitted to IEC60529 |
IP 54; category 2 |
Degree of soiling |
2 |
Diagnosis connection cable |
|
J1962 (ISO 15031-3) |
26-pin; rating 28 V; CAT O |
No customer reviews for the moment.
This is an approved tool for Mercedes, VW, Audi, Seat, Skoda, Bentley & Lamborghini (VASS), Porsche, PSA, Renault and BMW manufacturers. The professional, premium tool works seamlessly to enable the reprogramming of vehicles’ ECUs. It can be used effectively with Xentry pass-thru, BMW ISTA, Porsche Piwis software. Compatible with MULTIDIAG ACCESS 2 (AC965831)
Mercedes-Benz Original Actia I+ME eCOM Box interface for Xentry Openshell diagnostics VEDIAMO Monaco DTS COMAND NTG5, NTG5.5, NTG5s1, NTG6, NTG7 Serial number 21xxxx, For professional use only, software is not included